Burner Controls

Fireye provides a variety of burner control flame safeguard and combustion controls to the HVAC marketplace. Our BurnerPRO™, BurnerLogix™, Flame-Monitor™ and MicroM families provide safe and reliable light off of packaged burners used on commercial and industrial boilers as well as direct fired makeup air units and commercial hot water heaters. 

 

Flame Safeguard Controls

BurnerPRO Flame Safeguard

BurnerPRO Flame Safeguard

BurnerPRO controls are the ideal solution for both new installations and retrofit of Siemens LFL controls. Many BurnerPRO models are func...

BurnerLogiX Y Flame Safeguard

BurnerLogiX Y Flame Safeguard

Built-in techniques and algorithms allow the BurnerLogix to learn the characteristics of the fuel being burned and set its internal thres...

BurnerLogix Z Flame Safeguard

BurnerLogix Z Flame Safeguard

The BurnerLogix Z (ZB110) System expands on the standard BurnerLogix Y System by combining boiler control functions with the same bu...

Burner Efficiency Controls

Nexus NXF4000 Parallel Positioning

Nexus NXF4000 Parallel Positioning

The Fireye NXF4000 is an advanced burner management controller with an internal flame safeguard, designed to operate burners firing liqui...

Nexus PPC4000 Parallel Positioning

Nexus PPC4000 Parallel Positioning

When combined with a Fireye flame safeguard system such as the BurnerLogix™ control, the PPC4000 offers a compact parallel position...

Nexus NX6100 Integrated Parallel Positioning

Nexus NX6100 Integrated Parallel Positioning

The Fireye NX6100 supports up to 10 servo motors and has an optional 10.4" touchscreen display to show boiler operations and simplif...

Process Burner Controls

BF Series Bi-Flame Dual Burner Monitoring System

BF Series Bi-Flame Dual Burner Monitoring System

Controls startup sequence and monitors flame for two individual burners

The Fireye Bi-Flame Monitoring System controls the st...

D-SERIES 70D40 70D41 Burner Control

D-Series 70D40 and 70D41 Burner Control

Plug-in Amplifier Modules permit the selection of ultraviolet, repetitive self-check ultra-violet, AUTOCHECK infrared, or rectification m...

MB Series MB600S Burner Control

MB Series MB600S Burner Control

MB SERIES control has been engineered to meet the operational, safety and reliability requirements demanded by the industrial process hea...

Multiple Burner Controls

PMSTR-4000 Plant Master for NXF4000 and PPC4000

PMSTR-4000 Plant Master for NXF4000 and PPC4000

The PMSTR-4000 Plant Master provides central control of a steam or hot water system for up to eight NXF4000 or PPC4000 control units. The...

PMSTR-6000 Plant Master for NX6100 and PPC6000

PMSTR-6000 Plant Master for NX6100 and PPC6000

The Fireye PMSTR-6000 Plant Master offers sequencing and control for up to ten NX6100 or PPC6000 efficiency controls for steam plant appl...

Training Units & Testing Units

Nexus Trainin Unit

Nexus Training Units

The Nexus training and demo units (NX-ATU-4000 or NX-ATU-6000) provide users with the ability to familiarize themselves with th...

SB Series Training Unit

SB Series Training Unit

The Fireye Model 57SB4-1000 Tester provides a convenient means for testing SB Series controllers and
sensors. It also is a good tool...

Flame Scanners

Fireye Flame Scanners provide a variety of UV and IR flame scanners that accurately detect the presence or absence of flame in a combustion chamber and some provide both self-check and non-self check capabilities.

Integrated Flame Scanners

InSight II 95DSS3 Flame Scanner

InSight II 95DSS3 Flame Scanner

The Fireye InSight II flame scanners incorporate two internal flame relays with adjustable ON/OFF thresholds and two 4-20 mA analog outpu...

InSight 95DSS2 Flame Scanners

InSight 95DSS2 Flame Scanners

The Fireye InSight Type 95DSS2 flame scanners incorporate an internal flame relay with adjustable ON/OFF thresholds, thereby eliminating ...

Simplicity 65UV5 Flame Scanner

Simplicity 65UV5 Flame Scanner

The 65UV5 scanner is available with a one-second or four-second flame failure response time (FFRT) depending on the model selected. The &...

Discrete Single Burner Flame Scanners

55UV5 Series Scanner

55UV5 Series Scanner

55UV5 self-checking scanners are used to detect ultraviolet emissions from fossil fuel flames such as natural gas, coke oven gas, propane...

UV90L Series Scanner

UV90L Series Scanner

The UV scanner is ideally suited for gaseous fuels (natural gas & propane). However, it can be used in detecting flames from standard...

UV1A Series Scanner

UV1A Series Scanner

The UV tube is made of quartz and is filled with a gas that ionizes when struck by UV radiation from the flame. In the absence of UV radi...

Discrete Multi-Burner Flame Scanners

25SU3 Controls Amplifier

25SU3 Controls Amplifier

The Fireye 25SU3-2100 also maximizes burner discrimination with its ability to accurately differentiate the pulse rates produced by ...

25SU5 Controls Amplifier

25SU5 Controls Amplifier

The Fireye 25SU5 Control enables the construction of integrated safety interlock systems for single and multiple burner fired apparatus i...

45UV5 Series 1000_1010_1101_1103 Scanner

45UV5 Series 1000-1010-1101-1103 Scanner

When powered by a compatible, self-checking Fireye control, the scanners detect the presence or absence of flames that emit ultraviolet r...

Combustion Controls Accessories

Auxiliary products compatible with Fireye combustion controls and burner controls.

Fireye auxilary products include displays, servos, actuators, switches and communication accessories.

Providing clear communication and easy-to-use interfaces for Fireye burner control products including our flame safeguard controls and efficiency control systems.

Sensors

BLPS Pressure Sensor

BLPS Pressure Sensor

The BLPS, TS350 and TS752 series of pressure and temperature sensors are designed for use with the Nexus PPC4000 fuel air ratio cont...

TS350  & TS752 Temperature Sensors

TS350 & TS752 Temperature Sensors

The BLPS, TS350 and TS752 series of pressure and temperature sensors are designed for use with the Nexus PPC4000 fuel air ratio cont...

Communication Devices

inTouch Wireless Monitor

inTouch Wireless Monitor

The inTouch Wireless Monitoring System was developed to communicate directly to you through the ...

MB485ETH-CG Communication Gateway

MB485ETH-CG Communication Gateway

The MB485ETH-CG can connect to multiple devices simultaneously on one of two serial ports. Devices wire in a daisy-chain and configuratio...

Servos, Actuators, Drives & Switches

FX Series Servos

FX Series Servos

Use your PLC to connect to the FX Series servo using the Modbus RTU protocol via RS-485. Connect up to 10 servos in a point-to-point wiri...

AC Series Actuator

AC Series Actuator

The Fireye rotary actuator is a keypad programmable, direct coupled, modulating motor for use in burner and valve control systems. I...

DUNGS Pressure Switches

DUNGS Pressure Switches

DUNGS pressure switches complement Fireye’s range of flame safeguards, combustion efficiency and burner controls for a wi...

Touchscreens & Displays

NXTSD507HD and NXTSD512HD Enhanced Touchscreen Interfaces

NXTSD507HD and NXTSD512HD Enhanced Touchscreen Interfaces

The NXTSD507HD and NXTSD512HD enhanced touchscreen interfaces offer expanded capability beyone what the standard NXD410TS keypad can offe...

NXD410TS Touchscreen Interface

NXD410TS Touchscreen Interface

The NXD410TS provides the means to setup, monitor and display information from the NXF4000 and PPC4000 series of controls as well as any ...

NX6220 and NX6330 12-Key Keypad Display

The Fireye NX6220 or NX6330 (with Ethernet) OLED (Organic LED) 12 key keypad displays provide an easy to read, bright operator inter...

Spark Igniters and Gas Pilots

Fireye provides the SureFire™ igniter line for the reliable light off of large industrial burners and boilers in various utility applications.

View SureFire Brochure  |  SureFire Application Questionnaire  |  View Product Line Card

SureFire Spark Igniters

SureFire II High Energy Spark Igniter

SureFire II High Energy Spark Igniter

Fireye SureFire™ II High Energy Spark Igniters (HESI) are well suited to ignite most gaseous and liquid fuels, either by first igni...

SureFire II Portable High Energy Spark Igniter

SureFire II Portable High Energy Spark Igniter

The SureFire™ II HEP-2 is a battery powered portable spark igniter unit designed for safe hand operation. The portable spark ignite...

SureFire II High Tension Spark Igniter

SureFire II High Tension Spark & Sense Igniter

Fireye SureFire™ II High Tension Spark Igniters (HTSS) are designed to ignite a mixture of various types of gaseous fuels with air....

SureFire Gas Pilots

SureFire II Natural Draft Gas Pilots

SureFire II Natural Draft Gas Pilots

The Fireye SureFire™ II Natural Draft Gas Pilots are avalible with an outer diameter of either 32 or 48 mm, for intermittent or con...

SureFire II Forced Draft Gas Pilots

SureFire II Forced Draft Gas Pilots

The Fireye SureFire™ II Forced Draft Gas Pilots are avalible with an outer diameter of either 32 or 48 mm, for intermittent or cont...

Obsolete Products

Obsolete Controls

70D10

D-Series 70D10 and 70D20 Burner Control (Obsolete)

Fireye Series D10-20 Burner Management controls provide ignition and main flame failure protection for automatically ignited oil and gas ...

Obsolete Scanners

Paragon 105F1-1 Flame Scanner

105F1-1 Paragon Flame Scanner (Obsolete)

The Paragon scanner provides high integrity sensing of multiple flame properties, including Amplitude, Flicker Frequency and Flame Learne...

Phoenix 85UVF Flame Scanner

Phoenix Series 1 Type 85UVF-IRF Flame Scanners (Obsolete)

Phoenix scanners detect the amplitude of the modulations (the flame “flicker”) that occur within the targeted flame, over a w...

Signature Scanner 45FS1 and 45UVFS1 Series

45FS1 and 45UVFS1 Series Signature Scanner (Obsolete)

Both Fireye® scanners utilize a software algorithm that constantly compares the amplitude-frequency characteristics of the...

Obsolete Accessories

CM-420 Combustion Monitor

CM-420 Combustion Monitor (Obsolete)

The CM-420 Combustion Monitor can be used whenever an onboard means of oxygen monitoring is required. The CM-420 Combustion Monitor is al...

Obsolete Igniters & Pilots

SureFireâ„¢ I Igniters

SureFire I Igniter (Obsolete)

The 12 joules of power delivered to the spark tip easily ignites the fuel. Three sparks per second are delivered. The High Energy SureFir...

SureFire I Gas Pilots

SureFire I Gas Pilots (Obsolete)

The SureFire gas igniters are NFPA-rated as a Class 1, 2, or 3 igniter, depending on the application: Class 1 igniters are used for burne...

--> -->